Advanced Misting System

• 125 psi Diaphragm pump with 24V Power adapter
• 3/8" reservoir bulkhead
• 25 feet of 1/4" black opaque tubing (to connect pump to nozzles)
• 10 feet of 3/8" black opaque tubing (to connect reservoir to pump)
• 3/8" pump fitting (on the reservoir side of the pump)
• 1/4" pump fitting (on the nozzle side of the pump) Select from "pump fitting" options below to select 3/8" fitting.
• 9 Value "T" Misting Assembly (see link)
• 1 Value "L" Misting Assembly (see link)
• Seconds timer
• Installation instructions

This kit can be used as is. If you intend to use more nozzles, we recommend this system off of 3/8" backbone and splitting into 1/4" lines with the unequal "T" unions and unequal elbows. Alternatively you can use a 7 port manifold fed by 3/8" tubing

We suggest using this kit as the backbone for a custom misting system. Just add parts, nozzles, tubing and expand on this work horse. If you need help designing a system that will fit your particular situation, please contact us. Hobbyists and ZOOs run their entire animal rooms based on this kit.